How to Get Spark Plug Out of Socket – 5 Easy Methods
The spark plugs are without a doubt one of the most important components of a lawnmower engine. The spark plug is the very first element to inspect if your mower engine won’t start or run rough. In that situation, you might have to get the spark plug out of the socket. But it is quite a hassle if you don’t know the proper ways.
So, are you wondering, how to get spark plug out of socket?
To get the spark plug out of the socket you can simply follow 5 methods. First, you can use a Wrench. Secondly, use nose pliers. You can also get the plug out by using powerful magnets. Another way can be either using a rubber hose or some lubricant.
This was just the preview. For more detailed methods we have discussed below. So let us dive right into the next segment.
What's On the Page
- 1 5 Methods to Get Spark Plug Out of Socket
- 2 Before You Get into the Methods
- 3 FAQs
- 4 Conclusion
5 Methods to Get Spark Plug Out of Socket
There are several methods to accomplish this task. However, we found 5 methods to remove the spark plug out of your diy spark plug socket. Here in this segment, we’re going to discuss them. But before getting into the methods you have to go through some steps.
Before You Get into the Methods
On the exterior of the combustion chamber, there are spark plugs. Due to the intricacy of size, design, and power, the position may differ from model to model. However, the plug’s purpose remains the same. Here’s in detail:
1. Place The Mower On A Flat Area
To make getting to the underside of the mower easier, place it on a level. It should be a flat surface. If you’ve been running the engine, let it cool down.
Turning the lawnmower on its own side might cause oil to leak from the reservoir. Into other sections of the lawnmower. To stop it from moving, place it on the flat surface.
2: Prepare Your Equipment
Second, you’ll need to obtain a few basic pieces of equipment, just like you would for any other work.
Here are some things you’ll need to finish the job.
- Stuck spark plug removal tool such as Pliers for the nose (our pick: Lisle 51410 Offset Spark Plug Boot Removal Plier)
- A powerful magnet
- A nut wrench of appropriate size
These are really basic tools that are also quite simple to use. As a result, getting the spark plug out of the socket won’t be difficult.
Method 1: Using A Wrench
Disconnect the mower’s spark plug cables once you’ve gathered all of the equipment. Wipe out any dust and debris that has accumulated on the threads. The spark plugs are not the same size as those used in autos.
The diameter of their threads ranges from 10 to 12 mm. And sockets with a diameter of 3 to 4 centimeters are necessary to remove these plugs. Because you’re using a wrench.
Here are some of our preferred kinds of wrenches out there in the market:
- WORKPRO Pliers Set 4-piece Locking Plier Slip-joint Plier Groove Joint Pliers and Adjustable Wrench
- DURATECH 8-Inch Heavy Duty Pipe Wrench
You’ll need to be sure it’s the right size. Open-end, adjustable and box-end wrenches are all options. Twist the spark plug in a generally pro direction with the box-end or adjusting wrench.
Wrenches work in the same way as sockets do. They’re utilized to tighten or loosen things up. Just be sure you get the right size wrench, because the incorrect one won’t work.
It’s also worth noting that you should be cautious when using it to avoid damaging the threads.
Method 2: Using A Nose Plier
You’ll need to utilize the nose plier for this stage. Grip the nut section of the spark plug with the nose pliers’ metal gripping strands. Then you must pull it firmly. This is a different way to remove the spark plug.
Method 3: Using Powerful Magnets
If the preceding methods don’t work, there’s another simple option. In the mower, there are sparking plugs that are buried deep. As a result, removing them using a screwdriver or nose plier is difficult.
So, what are your options in such situations? With a magnet and a wrench, you can pry them out. Attach some strong magnets to the end of the wire. With magnets and a wrench, you can peel them out.
Place some strong magnets on the top of the screwdriver. And get it close to the terminal of the spark plug. The magnet will attract the terminal, allowing you to effortlessly take the plug out.
Method 4: Using A Rubber Hose
Another simple method is to wrap a strip of rubber hose around the plug’s end. Then, in a clockwise motion, spin it to capture the plug’s terminal. Pull on it after gripping it to release the spark plug.
Method 5: Applying Lubricant
Old spark plugs can sometimes refuse to turn. The spacing between the terminals narrows, and they begin to rust. Spray any form of lube and wait a few minutes in such circumstances. Then try again to turn it in.
Well, we’ve discussed 5 methods. Hopefully, these methods help you to learn how to remove the spark plug using only the equipment you have at home.
After Changing Spark Plugs, Why Do I Smell Gas?
Your spark plugs must be tightened, or else gasses may seep into the combustion chamber. Because this component is located directly adjacent to your HVAC input. You may sense a gasoline odor also. Remove every spark plug and examine the coils thoroughly.
How Long Does A Spark Plug Last?
The usual lifespan of a copper spark plug is 10,000-20,000 miles. Silver plugs, which are utilized in older automobiles, have a lifespan of up to 25,000 miles. Iridium or platinum spark plugs, which are more expensive, can last up to 60,000 miles. Spark plugs with an extended life span, often known as long life spark plugs, can last up to 100,000 miles.
Is It Possible To Clean Spark Plugs?
Yes, a scrub brush as well as spray-on plug cleaner can be used. Particularly to develop this ignition item should be used to properly clean a spark plug. Tough deposits can also be scraped away using a strong knife. Never use a shot blasting or abrasives to clean a spark plug.
So, by now you have already got your answer, how to get spark plug out of socket?
However, its now your turn to get the tools in hand and go for the task. Well one little advice, don’t overpull the spark plug. It might get damaged as the consequence.
That is all for today’s content. Wish you have a great time with your DIY mechanical task.